Phlogius crassipes (Australian Barking Spider)

 A tarantula from down under!

My 2.5" P. crassipes sling.

My 2.5″ P. crassipes sling.

Anyone who grew up watching Steve Irwin, AKA ‘The Crocodile Hunter”, knows that Australia is home to some of the most stunning and awe-inspiring wildlife on the planet. Heck, I still own the carpet python I bought after seeing him handle (and get bit!) by one. When I stumbled across my first photo of a species of tarantula from Phlogius genus, and discovered that it was from Australia, I knew that I would eventually keep one.

With a common name of “Eastern Tarantula”  or the more colorful variations of “Queensland Whistling Spider” or “Australian Barking Spider”, this thick-legged Old World species can reach lengths of 8 inches. It earned the name “whistling” or “barking” spider because this species stridulates, or uses hairs on its body to produce a loud “hissing” sound when it’s agitated. And for those who don’t heed this warning, its large fangs can deliver a potent bite.

Deep, moist substrate = happy spider!

I purchased a 1.5″ sling from Anastasia at Net-Bug back in April of this year, and it has quickly become one of my favorite species. So far, my P. crassipes has been a fast-growing species, molting twice in my care and putting on about an inch in size. As a sling, it started off as a chocolate brown color, although as an adult it will be mature into a smoky dark brown/black coloration.

In Australia, this species lives in deep, moist burrows and enjoys a higher-humidity environment. Keeping that in mind, I gave my sling an enclosure with four inches of moist substrate so that it could create its own burrow. I set the enclosure up in much the same way I do with all of my moisture-dependent species. After laying a half inch of wet vermiculite on the bottom, I then packed down a mixture of peat moss and coco fiber with some vermiculite added for water retention and percolation. I don’t add too much vermiculite as it can make the soil difficult to pack for the burrowing species.

The soil should be moist, but not wet. A good test is to squeeze your mixture in your hand. If you can squeeze water out of it, it’s too moist. However, if it sticks together and holds its shape without water dripping from it, it’s just right.

The enclosure itself is a modified plastic Sterilite storage container. I keep a water bowl in the enclosure at all times, and I will re-moisten the substrate once a week. I do not spray, but rather use a clean water bottle with holes melted in the top to “make it rain”, so to speak. I also allow water to dribble down into the burrow. This keeps the lower levels of his den moist, and keeps the humidity in the enclosure up as it slowly evaporates.

The custom enclosure for my P. crassipes sling.

The custom enclosure for my P. crassipes sling.

For temperatures, my P. crassipes is kept between 72 and 78º. Although I’ve read reports of people keeping them at higher temperatures (mid-80s is mentioned quite a bit), I’ve found that mine has been thriving with more moderate highs and lows.

A lightning-fast eating machine!

Within a day, my P. crassipes had dug a burrow all the way down to the bottom of the enclosure with two different entrances. It then created a “volcano” shaped structure over the top of the substrate and webbed around this. He likes to sit at the top of this construct with his legs just poking out as he waits for prey. As soon as a prey item hits the substrate, he tenses up and prepares to hunt.

This species has proven to be a fantastic eater. It receives 2-3 medium crickets a week, and so far it has yet to refuse a meal.  When I once dropped in a large cricket, this amazing little predator had no problem snatching it up. Speaking of snatching up prey…

These guys are FAST.

Besides more specific moisture requirements and an Old World bite potency, keepers need to be aware of this species’ speed. I’ve been dazzled on a couple occasions by just how fast my little guy can move. I once watched him bolt out of his “volcano”, snatch up a cricket, and retreat back into his den in a blink of an eye.

The footage below was meant to be a feeding video, but he unfortunately didn’t snag the cricket here. Still, it serves as a wonderful example of just how quickly they can move. So far, my sling is more skittish than defensive, although this could change at any time. With his speed, this T could easily bolt out of his enclosure if I’m not careful.

A fantastic tarantula for those who like thick, sleek, fast species.

The P. crassipes’ potent bite, skittish and sometimes defensive nature, and tremendous speed mean that this guy probably isn’t for the novice keeper. Those use to keeping slower, more docile species might find the crassipes a bit overwhelming. However, any keeper experienced with faster Old World Ts would likely find the P. crassipes to be an amazing and rewarding animal to keep.

It came! My Therophosa stirmi (Burgundy Goliath Birdeater)

Just one word…WOW.

After years of admiring this amazing species, and months experimenting and building up to the care requirements that would be necessary to keep this beast, my latest acquisition arrived. The Therophosa strimi I ordered from Stamps Tarantulas (sparkling review coming tomorrow!) arrived today, and I’m floored.

I was just telling my wife that since I got really into the hobby, I’ve lost some of that “awe factor” that I used to have when seeing a tarantula. Well, upon rehousing this amazing specimen, I definitely felt that sense of amazement again. Although I expected a 4-5″ T, this guy is definitely pushing 7″ and he is very stocky and heavy.

My new T. stirmi still in its shipping container. He was a bit reluctant to leave.

My new T. stirmi still in its shipping container. He was a bit reluctant to leave.

Getting him out of his shipping container was an adventure. This is one big T capable of a nasty bite or a very painful hairing. As I pulled out the layers of moist, rolled paper towel used to keep him hydrated and safe during shipping, I had to be careful that he didn’t kick any hairs or burst from the container. When he suddenly turned and exploded from the opening, I made sure my hands were out of the way. The force of his “kicks” as he scrambled out was amazing, and I was immediately impressed by his power.

My T. stirmi in the shipping cup after I removed much of the moist paper towel. Shortly after this photo was taken, he burst out.

My T. stirmi in the shipping cup after I removed much of the moist paper towel. Shortly after this photo was taken, he burst out.

He is now safely rehoused and exploring his new surroundings (for those interested in the story behind the enclosure, click here). Once he settles in, it will be time for his first feeding. I will post more in-depth about his care and husbandry soon.

My T. stirmi exploring its new enclosure. He's about 7".

My T. stirmi exploring its new enclosure. He’s about 7″.

 

 

T. Stirmi Custom Enclosure (In Progress)

The magic of trial an error.

With a 4-5″ Theraposa strimi (Burgundy Bird Eater) on the way, I needed to create a custom cage that would allow me to maintain proper conditions for this animal, namely the higher humidity requirements. I’ve experimented with many smaller setups, and have had good luck maintaining the right balance of airflow circulation and humidity for my moisture-loving species.

However, this enclosure would need to be a much larger. Plus, as Theraphosa require moist soil and consistently higher humidity levels, I needed to make sure that whatever I came up with was working out before my new T arrived.

It’s been about a week since I put it together and, with some experimentation and “revisions”, it is now working great. Waiting to have the T ship until I finished proved to be an incredibly prudent move, as this cage soon became a work in progress. For those interested, here is what I did:

The Materials

I started with a Ziploc 60-Quart Large Watertight Storage Box, which I purchased at Walmart for about $17. This container is quite spacious (23″L x 17″ W x 11″ T) and has six locking clasps around the edges. Nothing will be able to squeeze under the lid of this one. The lid also has a foam gasket in it to prevent precious moisture from escaping. This will make an excellent home until my T gains some more size.

Ziploc 60-qt Storage Bin Modified.

Ziploc 60-qt Storage Bin Modified.

For the initial venting, I used four 3″ white circular plastic vents that I had purchased from roundvents.com for $1.32 each. Using a 3″ hole saw and my power drill, I cut two holes on each of the long sides of the container  (Note: if you don’t have a hole saw, you can trace the vents, then use a regular bit to drill a series of holes all round the edge. Then, using a sharp utility knife, just make cuts and connect the holes).  I then glued the vents in place using Aquarium Silicone. To promote cross-ventilation, I positioned the vents on opposite sides of the enclosure.

Ziploc 60-Quart plastic storage bin with two 3" plastic vents installed on each side.

Ziploc 60-Quart plastic storage bin with two 3″ plastic vents installed on each side.

As the T. blondi will need to kept in moist soil, and I will have to add water from time to time to keep the humidity up, I experimented with soils a bit before coming up with the formula I used. I combined Scotts organic topsoil ($2.10) with organic peat moss ($9.99) mixed at about a 60/40 ratio. To this mixture, I then added several cups of vermiculite ($3.99) to help with water retention and percolation. (Note: As the topsoil comes in .75 cubic feet bags, and the peat moss comes in a huge 3 cubic foot bag, there is plenty of substrate left over for other enclosures).

I added water to this mixture until it was damp enough that it would hold its shape when squeezed, but not so wet that water would run out of it. After adding about 1/2″ of moist vermiculite on the bottom of the enclosure to hold moisture, I packed down about 5-6″ of my substrate mixture on top of it.

For a hide, I purchased a 3″ PVC elbow from Lowes for about $2.76. I wanted something that wouldn’t decompose or mold in the moist soil, hence why I didn’t use cork bark. I turned the elbow on its side, angling one end up for the entrance and pointing the other end toward the substrate. I then buried this, making sure that there was a bit of a hide, but leaving some dirt in it for the T to clear. The T. stirmi can now continue to enlarge his burrow by digging through the submerged end.

3" diameter white PVC elbow hide.

3″ diameter white PVC elbow hide.

Finally, I added a large plastic water dish which I had  on hand, as well as some long-fiber organic sphagnum moss to help with moisture retention. I also mounted a humidity gauge on the side of the enclosure to give me a rough estimate of what the humidity was inside.

With all of this done, I closed up the new enclosure and set it on the shelf for two days to see if it would maintain the correct level of humidity without spawning mold. I was looking to maintain a humidty level between 70 and 80% at about a 75º temperature.

Back to the drawing board.

During this trial run, the humidity in my home was around 75%, and the humidity inside the enclosure was steady at about 88%. When I opened it up after about two days, I immediately detected the slightest smell of mold or mildew. A closer inspection revealed that there was some light molding around the long-grain sphagnum moss. I removed the moss and left the cover off of the enclosure for a day to let some excess moisture evaporate. I later added a much thinner coat of moistened moss.

Obviously, the four vents I had installed wouldn’t be enough to allow for proper ventilation. Time for adjustments…

Using a 5/16″ drill bit, I drilled about 10 holes in the ends opposite where I installed the vents. I was hoping these would supply much needed cross-ventilation and prevent the humidity from remaining so high that mold and mildew occurred.

With these changes made, I closed up the enclosure and left it to sit another day.

Revision three

After about 24 hours, I took the cage out again. During this period, the humidity inside the cage was lower but still in the mid 80s. This wasn’t bad, but if the humidity in my home went up, so would the humidity in the enclosure, leading to levels that would promote mold growth.

This time I added about 15 more holes on each side and sealed it up again to see if this would lower the humidity even further. So far, so good! The humidity is holding right around 78% (the humidity in my home is around 64%)

Holes drilled for extra ventilation during the humid summer months.

Holes drilled for extra ventilation during the humid summer months.

As the humidity levels here can hit 80%, I may drill a few more holes in preparation for those really humid days. In the winter, our furnace dries out the air causing the humidity to plummet to the high teens. When this happens, I will use plastic and tape to cover up some of the holes to restrict some of the airflow and to prevent the cage from drying out.

Preparation and planning was key.

Had I tried to put this cage together without allowing myself time to experiment, this could have been a nightmare. I can’t even imagine trying to clean out the cage and make alterations while a 5″ T. stirmi was lurking inside. As humidity levels can vary depending on time of year and location, I would advise anyone setting up an enclosure for one of the moisture-dependent species to allow themselves some time to monitor levels and to make adjustments as needed. I have two more days before this beauty arrives, so I will continue to keep an eye on the humidity and make more changes as needed.

To be continued…

 

 

Chromatopelma cyaneopubescens (GBB) Care

This can’t be a real tarantula…

When I first began researching what type of tarantulas I might get to start my collection, I encountered a photo of a spider so colorful and beautiful, that I was at first convinced that it was a clever Photoshop creation. With its shimmering blue legs, metallic aqua carapace, and stunningly vibrant orange abdomen, this animal looked too striking to be real. A quick search revealed this amazing specimen to be the Chromatopelma cyaneopubscens, common name Greenbottle Blue or GBB for short.

C. cyaneopubscens

Immediately interested, I began researching the GBB to learn care requirements, temperament, and cost. Surely this unique tarantula commanded high prices like the equally beautiful P. metallica? Or, being new to the hobby, would I be overwhelmed by this spider’s temperament or husbandry requirements? I was delighted to learn that, despite being a bit skittish and faster than many recommended “beginner species”, the GBB’s heartiness and ease of care made it approachable for someone relatively new to the hobby. And with .75″ slings costing around $35-$40, they were definitely affordable.

Home Sweet Home

GBBs originate from an arid, tropical desert region in Venezuela, where they live in heavily-webbed burrows under local foliage. When researching, I discovered many older accounts by keepers who said that GBBs were a fragile species that was difficult to keep alive in captivity. For years, many kept this spider in moist enclosures with damp substrate and constant misting. As GBBs hail from an arid region, these wet, stuffy enclosures often proved fatal. GBBs should be kept on dry substrate in well-ventilated enclosures. As slings are more vulnerable to dehydration, you can moisten the edge of the enclosure and a corner of the substrate once a week (Do not spray; several drops from an eyedropper will suffice). For juveniles an adults, a water dish will provide any water they may need. You can also dribble water on the webbing at night before bed so that the spider can come out and have a drink.

Although slings may dig a bit, most GBBs will construct elaborately-webbed dens using any supplied cork bark hides or furnishings for anchors. Although this species has been referred to as a semi-arboreal, this not true— this is a terrestrial species. However, if provided with an enclosure with some height and taller furnishings (cork bark, vines, plants, etc), many GBBs will web up these and choose to perch themselves above the ground. The two juveniles I keep are often in their webs just an inch or two above the substrate.

My young adult female's enclosure. Notice the copious amounts of webbing.

My young adult female’s enclosure. Notice the copious amounts of webbing.

Some keepers see this behavior as a sign that this is an arboreal species, when instead it’s likely an animal making the best of the surroundings it has been provided.  As a terrestrial species, a fall from too high up could injure this T, and care has to be taken to insure that distance between the substrate and the top of the enclosure is not too high. This species should not be set up as an arboreal due to their skittishness and increased chance of injury from a fall. That said, giving them a bit of extra height above the substrate will allow the spider to web up a bit.

My two juvenile GBBs are kept on dry coco fiber substrate with cork bark slabs and water dishes provided. They do not use the cork bark as hides, but instead as anchors for their copious webbing. Even as slings, these two liked to fill their enclosures with thick layers of web. Despite the webbing, both usually sit right out in the open, remaining highly visible and making for fantastic display animals.

Like most of my Ts, my GBB is kept at normal room temperatures. During the summer months, temps range from the low 70s at night to low 80s during the day. In winter, it’s low 70s at night, mid 70s during the day. They seem to eat well all year round, unlike other species I keep that slow down during the winter.

My 2.75

My 2.75″ GBB

Beautiful and deadly…to crickets.

Part of a GBB’s hardiness comes from its excellent prey response and appetite. My two GBBs are, by far, two of my most vicious hunters. Because of the extensive webbing, they generally feel the vibration of the cricket or roach the moment it is dropped into the enclosure. I’ve had several instances when a cricket was snatched up the second it hit the substrate. They are fast and deadly, tackling and subduing prey items ferociously and efficiently. Out of all the species I keep, the GBB is in my top three of Ts I most enjoy watching hunt.

When slings, I would feed my specimens one small cricket every three or four days. As juveniles, I offered one medium/large cricket twice a week. The only time either has ever refused a meal is when in pre-molt. Their growth rate was medium to fast, with frequent molts bringing moderate changes in size. During its first year with me, my oldest GBB molted six times and in that time it went from .75″ to 2.75″. Molts usually came about every two months during this period.

As young adults, their molt schedules slowed down to about once every four months or so. Behaviorally, the young adults are a bit more skittish and prone to kicking hair at the slightest disturbance. Now that they are both around 4″, I feed them two large crickets once a week.

GBB-full-new

Young adult female C. cyaneopubscens (GBB)

A good “beginner species”?

The GBB’s hardiness, ease of care, and affordability might make one think that it’s a great starter species, and in some respect that is true.  However, this is a tarantula with some speed that also has a reputation for being skittish. I have never seen a threat posture or any type of defensive display from my specimens, and they have never been aggressive. As adults, however, they do like to kick hairs and will eventually bolt if disturbed. A keeper used to slower, calmer species may not be ready for a spider that may be out of its cage in the time it takes them to blink. Rehousings can be particularly fun, as the GBB is prone to bolting unpredictably in any direction BUT the one you want it to go in. That being said, a keeper new to the hobby who practices caution and care should have little problem with this beautiful species.

Poecilotheria Regalis (Indian Ornamental)

The Poecilotheria regalis originates from India, hence its common name of “Indian Ornamental”, and it is probably the most commonly kept of the Poecilotheria genus of tarantulas. This is an arboreal species that, in its natural habitat, lives in tall trees where it catches flying insects as its prey. In captivity, they are a hearty and gorgeous display tarantula for any keeper experienced with fast arboreal species.

My 3" juvenile P. regalis male.

My 3″ juvenile P. regalis male.

A word of caution…

Although the regalis is recognized as being one of the “calmer” members of this genus, it is still blindingly fast and possesses “medically significant” venom. This is not an animal to be trifled with or underestimated. I have seen my juveniles run several laps around their enclosures in blink of an eye. This is definitely an animal that can move faster than human reflexes can react.

In the case of  the P. regalis, when disturbed it would much rather hide  or escape than attack. Their fractile-like patterns serve as amazingly-effective camouflage, so standing still can likely help them to avoid detection in the wild. When approaching any of my Poecilotheria for feeding or maintenance , I tap the enclosures a couple times until I see them either hunker down or scramble to a hiding spot. This hopefully prevents me from spooking or surprising the Ts, which could cause them to bolt frantically around the cage (or, even worse, onto me).

Keeping my guy comfy (while keeping my fingers safe).

To reduce the risk of bite, I keep my P. regalis juvenile in a Sterilite Large Nesting Showoff plastic storage bin modified with cross-ventilation holes for airflow. The container is a bit larger than what I would normally use for a specimen this size, but I like to give myself plenty of room to work when feeding or performing maintenance on my large, fast arboreals.

The enclosure is deep as well as long, as this species requires more height than floor space. I provide it with a cork bark slab, which is put at about a 45 degree angle, as well as some plastic plants and rocks for hiding places. A water bowl is also supplied.

With a max diagonal leg span of 7″, the P. regalis is a good-sized T. This guy will likely end up in a 5-10 gallon-sized enclosure as an adult. Again, I will use something that gives me plenty of room to work for when it comes time for cleaning or maintenance.

Custom enclosure set up for my 3" P. regalis juvenile male.

Custom enclosure set up for my 3″ P. regalis juvenile male.

For substrate, my P. regalis is kept on a coco fiber/peat moss combination with moist sphagnum moss placed around the base of the cork bark to provide extra moisture.  I also moisten the substrate a couple times a week; this coupled with the water dish keeps the humidity inside the enclosure at an sufficient level. I do not obsess over exact humidity levels, and so far my Ts have been doing just fine. This species does, however, benefit from higher humidity. For temperatures, my P. regalis is kept at low 70s to mid 80s.

A fast-growing arboreal with a great feeding response.

My P. regalis has demonstrated a fast growth rate. They are good eaters, and it’s quite amazing to watch them hunt a prey item. I give my 3″ juvenile two medium/large crickets a week. This species seems to have little trouble taking down larger prey items. I procured this particular tarantula in February, and at that time it was about 2″ long. It has molted twice since then, and it’s now 3.25″ long.  I also have smaller P. regalis that I purchased as a 1.25″ sling in January. After three molts, it is now 2.5″.

This is the modified Ziploc plastic container I use to house my 2.5" P. regalis juvenile. He will likely get rehoused after his next molt.

This is the modified Ziploc plastic container I use to house my 2.5″ P. regalis juvenile. He will likely get rehoused after his next molt.

With its beautiful coloration and patterns, impressive size, and slender and athletic build, the P. regalis makes a stunning addition to any tarantula collection. As they are very prevalent in the hobby, the slings are quite inexpensive, running anywhere from $20 to $30, and a juvenile female can usually be purchased for under $100. That being said, this is a large, fast tarantula with very potent venom and not generally a species recommended for inexperienced keepers.

For more information on this wonderful species, visit arachnoboards and search key words P. regalis!

Tarantula Enclosures from Lorex Plastics … A Review

Gorgeous enclosures that wont break the bank

With several of my tarantulas reaching adult sizes, I found it was time to do some enclosure shopping. As I stated in an earlier blog, I use a variety of enclosures, including DIY and premium, professionally-made varieties. Premium enclosures can be costly, and when you have 50 or so Ts, you could end up spending more on the homes than you do on the animals. That said, I do have tarantulas that I consider worthy “showcase animals” that I like to show off to visitors. For these specimens, I don’t mind splurging for classier enclosures.

I had discovered Reptile-Enclosure.com last year while looking for large acrylic enclosures for my Ts. When I was first pricing cages on the site, I discovered the majority of the sizes were no longer in stock, and I wrongly assumed the company was no longer in business. In actuality, Reptile Enclosure.com is owned and run by Lorex Plastics Co, a plastics company that makes reptile and tarantula cages during the slow seasons. For those interested in these enclosures, this is something to keep in mind.

As luck would have it, I stumbled on Lorex’s eBay listing for two of their enclosures, and decided to check out the site again. I was ecstatic to discover that almost all of the sizes and types were in stock, and they were definitely still in business.

Lorex offers several types of enclosures, including arboreal and terrestrial varieties, as well as front-loading and hinged topped designs. For tarantulas, I specifically looked at the 3 mm Series, which includes convenient 2 gallon, 5 gallon, 7 gallon, and 12 gallon sizes.

I ordered three of the 5 gallon enclosures, which measure 17″ x 9″ h x 8″w and retail for $47.50 before shipping. Also, Lorex offers a 15% discount if you buy three or more cages of the same size, so I was afforded those savings as well. I phoned to ask a couple questions about my order, and spoke to Ed. Communication was excellent, and Ed was very friendly and helpful via phone and email.

My order was shipped promptly, and as Lorex is located just on the other side of my state, they arrived via UPS in a day. I always worry when I order acrylic cages, as I know how unforgiving the shipping process can be. However, my new enclosures were packed so well, nothing was going to harm them in transit. Each of the three cages was wrapped in five or six layers of bubble wrap, then individually boxed. These three boxes were then packed into another larger box for added protection. Wow.

One BIG box filled with three of Lorex's 5 gallon enclosures

One BIG box filled with three of Lorex’s 5 gallon enclosures

Each enclosure came wrapped in bubble wrap and in its own box.

Each enclosure came wrapped in bubble wrap and in its own box.

I was very pleased to discover that each enclosure was wrapped in 5-6 layers of bubble wrap.

I was very pleased to discover that each enclosure was wrapped in 5-6 layers of bubble wrap.

The cages themselves are well-constructed and just gorgeous. Each top-hinged door has a lip that overhangs the front and locks with a hasp. As these can be used for reptiles as well, they’ve been designed to have a 1/2″ of clearance beneath the bottom to allow for an under the tank heat mat (note: do not use heat mats for Ts). I love the look of the aluminum vents, although I’ll have to keep an eye on them as some terrestrial Ts have been known to chew through wire.

My only nit-picky issue is that the vents are not glued or otherwise permanently affixed to the cage, but this is a very small issue. I do love the position of the vents, as they allow for a deeper level of substrate than some of my other cages afford. The enclosures also feel very solid and sturdy, which is great.

5 gallon Lorex Acrylic Enclosure. Notice the lip and locking hasp.

5 gallon Lorex Acrylic Enclosure. Notice the lip and locking hasp.

I definitely recommend Lorex acrylic enclosures for anyone looking for a premium cage to display one or more of their prized tarantulas. They come in a number of convenient sizes, they are wonderfully constructed, and even with shipping, the prices are lower than other comparable acrylic enclosures sold elsewhere. Customer service was top notch, and Ed at Lorex was a pleasure to deal with. I’m already eyeing a couple of the 12-gallon versions for when my L. parahybana and P. antinous get a bit larger.

To check out these wonderful enclosures, click here!

My enclosure decorated and now the new home of my L. itabunae.

My enclosure decorated and now the new home of my L. itabunae.

 

Custom Dubia Roach Enclosure and Care

Over the past six months, my tarantula collection had grown a great deal in both the quantity of Ts kept and the size of individual specimens. I now had several adult/sub-adult Ts that required larger prey items, and I was looking for an alternative to the crickets. I decided that it was now time for me to start raising my own food source. So, a couple months ago, I purchased my first dubia roach starter colony of 125+ roaches. After doing some online research on dubia husbandry and breeding in which I discovered dozens of enclosure designs and roach-chow recipes, I was ready to set up my own colony.

What follows is what I have come up with to house and feed my roaches. This is, by no means, the only way to do it, nor can I take credit for coming up with these designs or methods. This is, however, what is currently working for me.

Start with a 7 gallon Sterilite Stacker Tote

I picked up my 7 gallon Sterilite at my local Walmart. You can definitely use a larger size of container, and many do, but I needed something that would fit comfortably on a shelf that I already used. Although these containers are offered in clear plastic, you want something that blocks most of the light out (roaches, as you may know, are NOT fond of the light).

UPDATE 11/2016: My colony grew rather quickly, so I now use a 58-quart Sterilite container.

I found this to be a great size for my roach colony enclosure.

I found this to be a great size for my roach colony enclosure.

Add some ventilation.

I always have some of these convenient plastic vents on hand from Round Vents , so I used them for my enclosure. These 3″ vents only run $1.32 each, and I find cutting two holes to install the vents MUCH easier and faster than drilling dozens of air holes. However, either way would work.

3" white plastic vents from Round Vents.

3″ white plastic vents from Round Vents.

To install them, I just used a 3″ hole saw and my cordless drill to make a hole on either side of the container. I used hot glue around the edges then just popped them in. (Again, you can drill a series of holes, and it will serve the same purpose and cost a bit less).

The vents have been installed on opposite end of the Sterilite enclosure. Vents should be closer to the top.

The vents have been installed on opposite end of the Sterilite enclosure. Vents should be close to the top.

Start saving those egg cartons!

You’ll need something inside the enclosure for the roaches to climb on and hide in. Cardboard egg cartons or egg trays work perfectly. If you have the forethought (and you eat a lot of eggs) save some of the ones you get when you buy eggs from your local grocer. You can also find them at tractor or farming supply stores. I bought mine at a local Agway. Many use the 6 x 6 egg trays, but for my smaller enclosure, the regular 2 x 6 egg cartons fit better. The larger trays can be purchased in bulk online.

Put these inside your enclosure for the roaches to climb on and hide in.

Put these inside your enclosure for the roaches to climb on and hide in.

 Roaches need food bowls, too.

It makes it MUCH easier to clean and feed your roaches if you supply food bowls. For mine, I used two Ziploc small square containers (5″x 5″), which I trimmed down with a pair of scissors to fit better and to add an entrance for the smaller roaches. One of these I fill with fresh organic fruit (nectarines, oranges, peaches, strawberries, grapes, apples, etc.). The other I fill with my homemade “roach chow”.

Two of these are supplied: one for fresh fruit and the other for the dry roach chow.

Two of these are supplied: one for fresh fruit and the other for the dry roach chow.

 Carefully fit everything into the enclosure.

On one end, stand up the egg cartons. I have two rows of five in mine, and the roaches seem to do fine. At the other end, place the two food bowls with the openings facing the egg cartons. When you get your roaches, carefully dump them on the egg cartons; they will quickly scramble down between them to hide.

The roaches will climb and hide in the egg cartons. The two food bowls contain fruit and roach chow.

The roaches will climb and hide in the egg cartons. The two food bowls contain fruit and roach chow.

A word about roach food.

It’s a fact: roaches will eat just about anything. As a result, there is no set, scientific diet for your feeder roaches. Do a quick search online, and you’ll find dozens, if not hundreds, of possible food choices. Moistened dog food, chicken mash, crushed cereal, organic tabbouleh…all are on the menu. While researching, I stumbled upon this cheap, simple recipe for “roach chow”, and so far it’s worked great. There are only two ingredients.

Flaked fish food.

Whole Oats

Goldfish flakes and whole oats combined and blended make great roach food.

Goldfish flakes and whole oats combined and blended make great roach food.

Just drop the oats and flakes in a blender (I do about 60/40 oats to flakes), blend to a powdery mash. Simple. I purchase large canisters of both, then blend up extra so that I always have it on hand. As both the flakes and oats can be purchased at Walmart for a few dollars, you can make enough food for months without hurting your wallet. I supplement the roach chow with fresh fruit to provide a more balanced diet. For water, I spray down one side of the enclosure just above the fruit dish every night, which has been fine and keeps things from getting too moist.

UPDATE 11/2016:  I have altered my roach chow recipe a bit. I now use oats, corn meal, and fish flakes in a 40/40/20 ratio or so. I drop these in a blender, grind them up good, then store them in an airtight container.

I also don’t offer fruit as often anymore, as it spoils very quickly (especially during the summer) and attracts fruit flies. I’ve switched to mostly carrots, potatoes, and some apples.

My container of "roach chow" (blended oats and fish flakes).

My container of “roach chow” (blended oats and fish flakes).

The hotter, the better.

If you want happy roaches and an ever-growing supply of feeders, you’d better be prepared to jack up those temperatures. Dubia thrive in warm environments. and you’ll need to keep them in the mid 80s to mid 90s if you’d like them to mate and reproduce. As these temps are too high for many T species, you will likely have to keep your feeders in a separate room. During the dog days of summer, I keep mine in my attic, where temps are almost always around 88-90 degrees.

UPDATE 11/2016: They do not need temps in the high 80s to low 90s to reproduce. Mine are kept much of the year in the 70s, and they still have young. That said, you get more offspring the warmer you keep them. If you can’t get your room temperatures up high enough to stimulate faster reproduction, you can use a heat mat on one side of the enclosure to raise temps inside. If you’re using a Sterilite bin, try mounting the heat mat on a wall, then position the cage next to it.

Keep in mind that high temperatures will cause fresh fruit to rot very quickly, so be sure to change the fruit bowl often to avoid fruit flies and decomposition.

In the winter months, they should really be kept 65-70 minimum. However, although this will be high enough to keep them alive, they will not be reproducing.

Cleaning is breeze.

My wife and I clean our colony every week, and we’ve found that it’s quite simple. Just lift out the egg cartons and place them in an empty cardboard box while you work. Remove the food dishes and any stragglers, then just dump the feces (which is tiny and dry) into the garbage. Use a damp cloth to clean up the bottom, dry it, then put everything back in. They are actually quite clean overall, and produce no real odor.

Simple and cheap!

So, there you have it. Again, this is not the only way to keep roaches, but this is how I’m currently keeping mine. It is also quite inexpensive to put together, costing around $20 for everything.  However, feel free to experiment or do whatever works for you. Dubia, generally speaking, are quite hardy and will adapt to other food sources or set ups.

 

 

 

 

Do-It-Yourself Sterilite Tarantula Enclosures

Part of the fun of keeping tarantulas, in my opinion, is the endless search for the perfect “found enclosure.” Sure, there are many gorgeous and professionally-designed cages to choose from, and they make lovely displays for any showcase Ts that you are particularly fond of. However, those with large collections can find housing all of their beloved spiders in these top-of-the-line terrariums much too expensive. That’s why many enthusiasts haunt their local WalMarts, Targets, craft stores, and Family Dollar’s looking for various canisters and containers that can be used “off label” as make-shift tarantula cages.

Sterilite has produced dozens of types of plastic storage containers over the years, and their products have long been used by budget-conscious T enthusiasts hoping to keep costs down as their collections expand. They offer containers in a ridiculous number of sizes, making them ideal for any larger T. And with prices often as low as $1.99 for smaller sizes, they won’t hurt the wallet as much.

I recently discovered their series of lockable and stackable storage containers, and was delighted to learn that they come in a number of convenient sizes. Instead of just drilling holes this time, which definitely works but is tedious and, in my opinion, not as attractive, I decided to use vents. The following is a little step-by-step tutorial for those interested.

NOTE: I know that some folks will argue that drilling holes is a bit cheaper (the vents I’m using her will run you an extra $1.90 or so per cage) or more attractive. Still, I like the look of these, and I find the vents less tedious to install. I also have plenty of enclosures with drilled or melted air holes, so I have NO problem with these.

MATERIALS

1. Buy the Sterilite Containers.

Here are several sizes of storage boxed (as well as a plastic canister that I will modify later). These are wonderful, as they stack quite nicely, saving space.

Here are several sizes of storage boxes (as well as a plastic canister that I will modify later). These are wonderful, as they stack quite nicely, saving space. I purchased these at WalMart, but they can also be found in Target (although their selection hasn’t been as good).

2. Get Some Aquarium-safe silicone.

Next, you will need aquarium silicone, which dries non-toxic. For those with hot glue guns, those will work as well.

Next, you will need aquarium silicone, which dries non-toxic. For those with hot glue guns, those will work as well. I allow three days for a full cure.

3. Get 2″ round plastic vents.

I purchase these at  roundvents.com. I like the plastic ones, as I worry that a large T could chew through the wire ones.

Vents of this type can be found through several online vendors. I purchased these at roundvents.com. I like the plastic ones, as I worry that a large T could chew through the wire ones.

4. Grab a 2″ Black & Decker (cheap!) hole saw.

To drill the holes, you will need a 2" hole saw. If you don't have one, Black & Decker makes a cheap set that includes the 2" saw for under $10.

To drill the holes, you will need a 2″ hole saw. If you don’t have one, Black & Decker makes a cheap set that includes the 2″ saw for under $10. I found this one at my local WalMart.

5. Clamp the container down before drilling.

Again, you can probably have someone hold while you drill, but I have the clamps handy, so I use them. Notice the piece of wood underneath, which gives you something to drill in. You can also use the circle created by earlier drillings to line up the hole.

Again, you can probably have someone hold the container while you drill, but I have the clamps handy, so I use them. Notice the piece of wood underneath, which gives you something to drill in. You can also use the circle created by earlier drillings to line up the hole.

6. Carefully drill your holes.

Mark the entry point for the guide bit with a Sharpie to keep the hole centered. When drilling, don't push too hard and allow the drill to do it's work. Be careful that the bit doesn't heat up too much, as if it does, it can melt the plastic. Use a piece of wood underneath to drill into  and for support.

Mark the entry point for the guide bit with a Sharpie to keep the hole centered. When drilling, don’t push too hard and allow the drill to do its work. Be careful that the bit doesn’t heat up too much, as if it does, it can melt the plastic. Use a piece of wood underneath to drill into and for support.

7. After drilling the holes, clean edges with a utility knife.

Unfortunately, the drilling process can leave behind some gnarly and an sharp piece of plastic around the edges. Use a utility knife to carefully trim away these scraps.

Unfortunately, the drilling process can leave behind some gnarly and an sharp pieces of plastic around the edges. Use a utility knife to carefully trim away these scraps and make for a clean fit.

8. Put a thin bead of silicone (or hot glue) around the rim of the vent.

Run a nice, thin bead of aquarium safe silicone around the lip of the the vent. Although the vents sport tabs that help "lock" them in place, the silicone seals it up and makes it permanent.

Run a nice, thin bead of aquarium safe silicone around the lip of the the vent. Although the vents sport tabs that help “lock” them in place, the silicone seals it up and makes it permanent. Hot glue can also be used, meaning the enclosure could be used sooner as you won’t have to wait for the silicone to cure.

8. Line up the vent and carefully pop it in.

Now, line up the vent and carefully pop it in. I like to do one side facing up and one side facing down. Use a moist paper towel to clean up any excess silicone.

Now, line up the vent and carefully pop it in. I like to do one side facing up and one side facing down. Use a moist paper towel to clean up any excess silicone. I put a vent in two opposite sides of the the container to allow for cross ventilation.

9. Newly vented cages stacked in a cluttered garage.

Several of the newly-vented enclosures. The large one on the bottom will be fitted with 4" vents.

Several of the newly-vented enclosures. The large one on the bottom will be fitted with 4″ vents.

 10. Modified cages in use.

A couple of my earlier enclosures, already occupied. The top enclosure does NOT have vents. For that one, I used a nail heated on a burner to melt the holes into it.

A couple of my earlier enclosures, already occupied. The top enclosure does NOT have vents. For that one, I used a nail heated on a burner to melt the holes into it.

A small note about ventilation: I find that the 2″ vents work very well with this size enclosure. However, after noticing some condensation collecting on the lid of one of my cages after moistening the substrate, I added a row of holes in the lid above the sphagnum moss to allow for a bit more airflow. The moss stays moist, but I no longer get the condensation. Still, I’ve only done this to one enclosure that housed a T that required more moisture.

 

H. incei gold Feeding Video

I recently acquired a trio of juvenile/sub-adult H. incei golds, and I immediately discovered what a truly beautiful and interesting species they are. These lively little dwarfs sport gorgeous gold and orange tones that make them wonderful display spiders. They also like to decorate their enclosures with copious amounts of thick webbing, making them one of the more prolific webbers of the species I keep.

One of my H. incei golds after being housed. Not the best picture, as the flash has washed out it's colors.

One of my H. incei golds after being housed. Not the best picture, as the flash has washed out it’s colors.

All three have been excellent eaters, snatching medium crickets from the mouths of their burrows with lightning speed. Although they were furnished with identical enclosures with cork barks and starter burrow holes dug into the substrate, only two of my H. incei golds adopted these as homes. Both of these two dug deep burrows before lining the opening of their dens in a liberal coating of silk.

The third built what I can best describe as a silken teepee over its cork bark hide. This specimen did not dig, but instead sits on the surface, sometimes beneath its hide, waiting for prey. It makes for a wonderful showcase animal, as it is more often than not visible. It is this T that is featured in the feeding video.

A modified Ziploc container. This H. incei dug a deep burrow; the circle marks the lower chamber.

A modified Ziploc container. This H. incei dug a deep burrow; the circle marks the lower chamber.

I keep my H. incei golds in the same temperatures as my other Ts; high 70s during the day with low 70s at night. I also keep the substrate for these guys on the moist side (not wet), by sprinkling water on the surface twice a week. They are currently eating one medium cricket every three or four days.

While feeding my surface-dwelling incei, I decided to get a bit of video with my cell phone. Below is a brief clip of my little guy snatching up a cricket. My apologies for the raucous soundtrack; it is covering up my daughter telling me a story in the background. 🙂

For lovers of dwarf tarantula species, or even just those who want a gorgeous, heavy-webbing T, the H. incei gold makes a wonderful pet.

 

 

The Poecilotheria metallica – Yes, Tarantulas Can Be Beautiful

When  I first started researching the different species of tarantulas currently available in the hobby, I stumbled across a photo of a Poecilotheria metallica (common name “Gooty sapphire ornamental”). This stunning tarantula sported an amazing metallic blue coloration with a gorgeous fractal pattern on its abdomen and vibrant yellow marking on its legs. The tarantula in the photo was so mind-blowingly beautiful, that I immediately assumed that it was just a clever photoshop job. After all, there was no way a tarantula could be this blue; the picture had to be a fraud.

My 1.75

My 1.75″ P. metallica sling a week after its last molt. It is finally displaying some of those gorgeous blues it will sport as an adult.

It was close to a week later when I encountered another amazing photo of this species, and this time, I decided to do some investigating. Not only did I learn that this was, indeed, a real animal, but also that it was one of the most coveted species in the hobby. Despite being quite readily available, this species still commanded prices as high as $100 for a small sling. Also, although captive breeding efforts provided for healthy numbers in the hobby, this incredible animal is critically endangered in the wild. Limited to a 100 square kilometer region in India, its habitat is being threatened by deforestation.

Although these tarantulas are undeniably pretty, they are still members of the Poecilotheria genus. As such, they possess blinding speed and, though usually reluctant to bite, very potent venom. At the time, I decided that that I needed some more experience with faster species before trying my hand at keeping a P. metallica, so I moved on to other species.

Several months later, my wife took me to a semi-local exotic pet store called Cold Blooded Pets & Supplies for my birthday so that I could peruse their stock of Ts and choose a few for my gift. It just so happened that they had several P. metallica slings among their rather diverse stock. Needless to say, we left with one that afternoon.

Gorgeous … and So Fast!

Although I’ve found most poecilotheria slings to be high-strung and skittish, my P. metallica is particularly prone to make dashes whenever disturbed. Anyone who thinks that they could possibly react in time to a fast fleeing T should watch this little bugger zip around its enclosure four or five time in the blink of an eye. I’m extra cautious when opening its enclosure for feeding or maintenance, as to lose focus could result in an escape.

Like my other pokies (nickname for Poecilotheria), my P. metallica has been growing quickly, having molted two times since late February and picking up .5″ in growth or more. For an enclosure, I use a tall Ziploc Twist ‘n Lock container modified with numerous ventilation holes allowing for good cross-ventilation. Because this is a an arboreal species, the height offered by the enclosure is more important than floor space. Although it is provided with cork bark hide with a thick faux vine for climbing, it tends to just stay at the top of the enclosure. As P. metallica’s are known to be particularly photosensitive, I keep this T in a darker corner of a shelf where it is shielded from light a bit.

The current enclosure for my 1.75-2

The current enclosure for my 1.75-2″ P. metallica sling.

Although kept at the same high 70s day/low 70s night temperatures, I do keep the humidity a bit higher for this T. I moisten, not soak, the substrate a bit once a month. To do this, I don’t spray as it would drive the little guy nuts. Instead, I dribble some water on the substrate.  Besides that, a water dish keeps the humidity inside the enclosure slightly higher.

My P. metallica is a great eater, consuming two medium sized crickets a week. The only time it refuses food is when it’s in premolt. As it does not like bright light, I usually drop a cricket in before bed, and it will grab and consume it overnight.

Ventral shot of my P. metallica sling. Despite the poor quality of the shot, you can still make out the yellow banding.

Ventral shot of my P. metallica sling. Despite the poor quality of the shot, you can still make out the yellow banding.

Update: 2/27/2016

As it’s been over a year since this post, and my P. metallica has been doing quite well. Time for an update!

The P. metallica, suspected female, has molted three times since the original post and is now about 4″ in total length. Currently, she is kept at temperatures between 80° during the day and about 74° at night. She eats two large crickets a week and has proven to be a lively and proficient hunter.

It’s worth noting that the P. metallica went through a lengthy period of almost six months in which she didn’t molt at all (previous to this, she would molt every two months or so). This period began in November and lasted until May and coincided with the winter months. It was a particularly cold and brutal winter in which the furnace was running constantly. Although the temps in the tarantula room never dipped below 70°, the humidity was in the teens for several months. The P. metallica had a water dish, and I would periodically moisten the substrate, but I’m convinced that these lower humidity levels and slightly-lower temperatures triggered some type of response in the specimen that led to the lengthy time between molts.

P.-metallica

It should be noted, however, that the P. metallica DID continue to eat during this period. However, due to the fact that its abdomen was quite large and distended, I reduced it’s feeding schedule to one cricket every week or so. Therefore, it appears that although it didn’t show any signs of distress as the humidity levels became less than ideal, it certainly slowed its growth rate a bit.

When it did finally molt, it was time for a rehousing. For its next home, I used a repurposed Sterilite “Showoff” container (15 1/4″ L x 9 3/4 W x 11 1/2″ H), which I ventilated with several holes in the sides for cross-ventilation. After packing in about 3″ of coco fiber, peat moss, and vermiculite substrate, I added a water dish, a cork bark flat, and some plastic plants. I also added some long fiber sphagnum moss to hold moisture. When winter approaches, this new enclosure will make it much easier to maintain a micro climate with higher humidity.

Enclosure-top-down

Temperament wise, I think that I got lucky with this one. Once very skittish and photosensitive, she now sits mostly out in the open and tends to crouch down rather than bolt when disturbed. That’s not to say that she doesn’t have frantic speed bursts left in her; she can still run when startled.

Poecilotheria metallica

Poecilotheria metallica

A Stunning Species for the More Experienced Keeper

When someone gives me that incredulous look after I say a tarantula can be beautiful, I usually show them photos of P. metallicas. Even to folks who don’t “get” tarantulas, they are undeniably pretty. Many keepers count them as the most beautiful species available. Still, they are Poecilotheria, and as such, are not a beginner species. This T has slightly more involved husbandry requirements, and its blinding speed and potent venom make it a potentially dangerous pet for an unwary keeper. For those experienced with fast-moving arboreal Ts, the P. metallica is a must for the collection.

For more information on this gorgeous species, please visit Arachnoboards and search for P. metallica care.